Featured
Volume 3, 2023
Issue 3
DETERMINATION OF THE CONTENT AND ANALYSIS OF TECHNICAL WATER OF OIL SLUDGE
Abdugoffor M. Khurmamatov, Alisher U. Auesbaev, Zamir M. Khametov

Oil sludge contains a large amount of heavy metals that enter the soil and are enriched with agricultural crops. Light components such as benzene, phenols, low molecular weight hydrocarbons, etc. contained in oil sludge can evaporate into the air, which pollutes the atmosphere and irritates the respiratory tract and skin. Disposal of oil sludge is a difficult task, since oil sludge has both resources and harmfulness. This will require, first of all, studying the physico-chemical compositions of oil sludge. In this article, a number of experiments were carried out, such as the study of the physico-chemical composition of the oil sludge of the Bukhara oil Refinery. Extraction of technical water present in the oil sludge and the study of its physico-chemical parameters. The experiments were carried out in laboratory conditions together with the laboratory of the Institute of Mineralogy of Resources, the composition of industrial water was studied on an Atomic Absorption spectrometer device. The hardness of water was studied by titration, the pH-medium of water was determined. The comparison of industrial water with clean water is also considered.

Download
RESULTS OF PRELIMINARY ANALYSES TO DETERMINE PROPERTIES AND FRACTIONAL COMPOSITION OF OIL SLUDGE
Abdugoffor M. Khurmamatov, Muslimbek V. Jurakulov, Asan A. Sultanov

In the article physicochemical characteristics and fractional composition of oil sludge are studied. Therefore, we have carried out laboratory experiments to determine the physical and chemical properties of feedstock. As raw materials for obtaining anti-corrosion coatings 2 samples of oil sludge were selected, which were brought from Bukhara oil refinery (sample 1) and from Fergana oil refinery (sample 2). On the basis of oil sludge analysis it was established that there is a significant amount of oil products in them, which are mainly heavy fractions of oil. Based on the results of the study of group composition and physico-chemical characteristics, we selected oil sludge from Bukhara refinery as a promising raw material for anticorrosion coatings. The obtained data are of practical interest for utilisation of oil sludge as a raw material for obtaining anticorrosion coatings.

Download
IMPROVING THE EFFICIENCY OF THE HYDROCARBON VAPOR COOLING PROCESS
Jaloliddin A. Muminov

The article presents experimental results and analysis of the effectiveness of air cooling of hydrocarbon vapors. The description and principle of operation of the experimental device is explained. It is established that the cooling efficiency when using dry and wet air differs by 9-13 percent when the volume flow rate of the product varies from 3 to 11 l/min. Gasoline fraction of grade Ai 80 was used in the experiments.

Download
EFFECT OF FLOW RECIRCULATION ON HEAT TRANSFER INTENSITY IN A TWO-TUBE HEAT EXCHANGER
Oybek Y. Ismailov, Dzhamila N. Istamova

The results of computational and experimental studies of the heating process of an oil and gas condensate mixture of 70\(\%\)Gascondensate+30\(\%\)Oil with recirculation of part of the flow in an experimental two-tube heat exchanger are presented. According to the results of the experiments, it was determined that in the case of organizing the heating process with recirculation of 10-30\(\%\) of the volume of the mixture, the flow rate in the pipe of the experimental apparatus increases from 0.291 to 0.345 m/s, the temperature of the heated mixture at its outlet increases from 69 to 83 \(^{\circ}\)C, the temperature difference of the heated mixture increases accordingly from 3 to 14 \(^{\circ}\)C compared to the control experience. It was found that when recirculating 25\(\%\) of the flow volume, the temperature of the heated mixture increases by 1.2 times, its viscosity decreases to 1.17 times, the flow rate increases by 1.2 times, and the thickness of the viscous sublayer in the pipe decreases by 1.25 times. At the same time, the improvement of the hydrodynamic conditions of the process contributes to an increase in the heat transfer coefficient in the apparatus by 1.14 times, an increase in the transferred amount of heat by 1.4 times and a sharp decrease in the rate of scale formation in the heat exchange pipe. It is shown that when organizing a process with recirculation of a part of the flow, it becomes possible to achieve an improvement in the hydrodynamic conditions of the process, an additional rise in the temperature of the heated raw materials and an increase in the heat transfer coefficient in tubular apparatuses up to 15\(\%\).

Download
RESULTS OF DETERMINING THE COMPOSITION OF OIL-CONTAINING WASTE
Abdugoffor M. Khurmamatov, Nadira K. Yusupova, Nuritdin P. Alimov, Javohir K. Mirzayev

The article presents the results of the study of the composition of oil sludges of different origins and the amount of mechanical additives in them, the results of experiments with various solvents on the separation of unnecessary additives in reservoir oil sludges, oil sludges left over from technical water treatment, and oil sludges collected in the sludge storage tank. The composition of oil sludge is very important for all types of sludge, and this indicator plays an important role in experiments carried out for the purpose of processing, disposal of oil sludge, obtaining secondary products from them or increasing the base of oil raw materials. Therefore, the amount of mechanical additives in the three types of oil sludge brought from Fergana oil refinery plant was determined in laboratory conditions.

Download
INCREASING THE EFFICIENCY OF THE GAS REFINING PROCESS THROUGH THE RECOVERY OF ALKANOLAMINES
Ganisher B. Rakhimov

In this article, the technology of gas purification from sour components by absorption method is aimed at achieving long-term use in the process of gas purification by determining the composition of used alkanolamine solutions and regenerating them. Using the ion exchange method: it is recommended to reduce the amount of active components in the solution, to compensate for this by adding new alkanolamine and piperazine; It is based on the fact that the composition additives affecting the operational properties of the used alkanolamines lead to a decrease in the amount of thermally stable salts, free elements, and heavy organic substances. With this, in turn, the physico-chemical properties of used alkanolamines, which affect the operational properties of viscosity and foaming, surface tension, were found to be in accordance with the norms, and it was recommended to reuse them.

Download